Printing Method |
Direct inkjet garment printer |
Machine Size |
1780mm x 1300mm x 1210mm (with recommended stand) |
Machine Weight |
Appox. 165kg include. Platen (Not including stand) |
Platen sizes |
Maximum Print Size is 40,6cm x 53,3cm / 16” x 21” |
Included platen size |
35,6cm x 40,6cm / 14” x 16” |
Ink Type |
Water-based pigment ink |
Ink-head type |
On demand piezo head |
Number of ink-heads |
2 print heads / 8 ink channels |
Print resolution |
1200 dpi x 1200 dpi |
Print mode |
Single or double for CMYK. Underbase and highlight for white |
Enviroment |
Standby Conditions: 10°C-35°C, 20%-85% |
Operating conditions |
18°C-30°C, 35%-85% |
Data output |
Printer driver (USB, File output) |
Power supply |
AC 100V-240V, 50/60Hz ± 1Hz |
Power consumption |
0.8A (average) (Reference: 0.4A - during circulation) |
Ink cure |
Heat press machine can be used at 180°C (356°F) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 160° (320°) for 3 1/2 minutes. Time and temperature may vary depending on which manufacturer‘s dryer is used. |
Pre-treatment |
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer‘s instructions. Pre-treatment is necessary for white ink. |