( 0 )
 Back
|
Mimaki
Overview
Specifications
Software
Video
Support Documents
ML Tiger-1800B MKIII How to clean and maintenance
ML Tiger-1800B MKIII Operation Manual
Tiger-1800B MkIII
Top
Textile inkjet printer with belt conveying system (Direct-to-textile / Sublimation transfer)
Maximum print speed: 385 m²/h

"Tiger-1800B MkIII" is  a new model added the "Mimaki Printer Controller" of new touch-screen operation software to the "Tiger-1800B MkII", that pursues speed and beauty based on the enhanced stability and high accuracy of print technology which results in high-quality printing.

It combines high productivity with a maximum print speed of 385 m²/h and long operating stability by means of 10kg ink tank for low running costs, allowing you to choose the print speed that best suits your jobs, from high speed printing focusing on productivity to high quality printing pursuing beautiful printing.
  • Line-up
    • Direct-to-textile model
      Total 16 print heads: 2 x 8 in a staggered layout
    • Sublimation transfer model
      Total 8 print heads: 2 x 4 in a staggered layout
  • Product outline of Textile Printer "Pro series - Tiger-1800B MkIII"
  1. It is equipped with Mimaki Printer Controller
  2. "Nozzle Recovery System" for continuous operation
  3. Mimaki Advanced Pass System 4 (MAPS4) is supported
  4. Ethernet 10GB-T supported
  5. Compatible with "TxLink4", the advanced high-performance RIP software

Feature
It is equipped with Mimaki Printer Controller New!
  • Touch-screen based printer operation software is installed on our system. Because this printer has been designed for one touch ease of operation, you can set up, operate it and output data from it with one-touch simple operation.
"Nozzle Recovery System" for continuous operation New!
  • When any clogging of a certain nozzle cannot be solved even after cleaning is performed for it, such nozzle will not be used, and another normal nozzle will be used instead (nozzle recovery function).                                                      
    In this way, it becomes possible to perform the ongoing print job continuously.
Mimaki Advanced Pass System 4 (MAPS4) is supported New!
  • Smooth prints can be realized by printing pass boundaries fading in gradation, while banding (horizontal stripes), uneven color, or glossy streak can be reduced.
Ethernet 10GB-T supported New!
  • Added support for 10GB-based Ethernet controller. Print data transfer at higher speed is now available.
Selectable print mode to suit the production (from high-speed to high-quality)
  • For the realization of higher quality of print, 1,200 dpi print mode is added and the multi-pass is applied.            
    Tiger-1800B MkIII will apply the production from the high-speed print regarding much importance for productivity to the high-quality print of beautiful image.
Print speed 
  • Maximum print speeds of up to 385 m²/h (*) in high-speed mode.* Draft (3 droplet size) mode (600 × 600 dpi, 1 pass, Bi) Textile width: 1,850 mm
Direct-to-textile Print speed (Bi-direction)
 
Mode Resolution Pass Layer Print speed
Draft (3drop) 600×600 dpi 1 1 385m2/h
High-speed (4drop) 600×600 dpi 1 1 295m2/h
Standard 1 (3drop) 600×1,200 dpi 2 1 210m2/h
Standard 2 (4drop) 600×1,200 dpi 2 1 155m2/h
High-quality 1 (3drop) 1,200×1,200 dpi 2 1 120m2/h
High-quality 2 (4drop) 1,200×1,200 dpi 2 1 85m2/h
Mode Draft (3drop)
Resolution 600×600 dpi
Pass 1
Layer 1
Print speed 385m2/h
Mode High-speed (4drop)
Resolution 600×600 dpi
Pass 1
Layer 1
Print speed 295m2/h
Mode Standard 1 (3drop)
Resolution 600×1,200 dpi
Pass 2
Layer 1
Print speed 210m2/h
Mode Standard 2 (4drop)
Resolution 600×1,200 dpi
Pass 2
Layer 1
Print speed 155m2/h
Mode High-quality 1 (3drop)
Resolution 1,200×1,200 dpi
Pass 2
Layer 1
Print speed 120m2/h
Mode High-quality 2 (4drop)
Resolution 1,200×1,200 dpi
Pass 2
Layer 1
Print speed 85m2/h

Transfer sublimation Print speed (Bi-direction)
 
Mode Resolution Pass Layer Print speed
Draft (3drop) 600×600 dpi 1 1 385m2/h
High-speed (4drop) 600×600 dpi 1 1 295m2/h
Standard 1 (3drop) 600×1,200 dpi 2 1 210m2/h
Standard 2 (4drop) 600×1,200 dpi 2 1 155m2/h
High-quality 1 (3drop) 1,200×1,200 dpi 3 1 135m2/h
High-quality 2 (4drop) 1,200×1,200 dpi 4 1 80m2/h
Mode Draft (3drop)
Resolution 600×600 dpi
Pass 1
Layer 1
Print speed 385m2/h
Mode High-speed (4drop)
Resolution 600×600 dpi
Pass 1
Layer 1
Print speed 295m2/h
Mode Standard 1 (3drop)
Resolution 600×1,200 dpi
Pass 2
Layer 1
Print speed 210m2/h
Mode Standard 2 (4drop)
Resolution 600×1,200 dpi
Pass 2
Layer 1
Print speed 155m2/h
Mode High-quality 1 (3drop)
Resolution 1,200×1,200 dpi
Pass 3
Layer 1
Print speed 135m2/h
Mode High-quality 2 (4drop)
Resolution 1,200×1,200 dpi
Pass 4
Layer 1
Print speed 80m2/h

Plotting Method
  • 1 pass mode: High speed printing is possible
    In 1 pass mode all printheads are used. One print width is equivalent to two staggers, and printing at high speed is possible.
  • Multi-pass mode: High quality printing is possible
    Multi-pass means to print a determined printing area by multiple times with different nozzles, which allows to suppress the cause of stripe and band and create a beautiful print.
Droplet print mode selection suitable for print data
Depending on ink type and printing mode, there are 4 different droplet sizes. Droplet print mode can be choose to match the print data from high speed and standard mode.
  • High speed (3 droplet size) mode
    Ideal for fine design data such as thin lines and for light colors printing.
  • Standard (4 droplet size) mode
    Ideal for printing where density is required such as monochromatic colors.
Stable and reliable mechanism secures high-speed printing
  • Stable textile transportation mechanism
    • Textile transport security is achieved by the twin pressure roller shafts attached to the edge of the transportation belt. Textiles are uniformly applied without wrinkling onto the belt through the upper and lower rollers (Fig. 1), assuring stable textile transportation. Furthermore, the wrinkle and jam sensors detect textile wrinkling or creasing early in order to minimize potential damage to the printheads from collisions with raised or jammed textiles.
  • Degassing module and ink circulation mechanism maintain optimum ink conditions
    • Air bubbles generated in the ink can lead to missing nozzles because such bubbles act as cushions that decrease ink ejection power. To assure stable ink-jetting, each model of the Pro series has a degassing module that removes bubbles and constantly circulates ink.
  • Automatic wiper cleaning
    • Cleaning liquid is automatically applied to each wiper before and after head cleaning. This liquid enhances the cleaning effect during the head-cleaning process, ensuring a clean wiper and reducing daily maintenance time. Furthermore, as each printhead has its own wiper, quick and effective cleaning is enabled while color mixing in the printheads is avoided.
Large-sized ink tank (10 kg) ensures cost-effective print operation
The bulk ink supply delivers cost-effective printing and enables long-hour printing. Furthermore, the printer monitors the ink level using a weight detection sensor and displays an alert on the operation panel when the ink level is low.
Extensive optional units for accommodating various applications
Extensive lineup of optional devices to be selected according to the type and status of fabric and transfer paper, including the storage after printing.  
Optimal introduction is available to suit the production process of customers.
  • Direct-to-textile model option
    • Small feeding for fabric (OPT-J0452) 
      Small feeding unit of standard roll fabric type.
    • Fabric drying heater (OPT-J0416)
      Standard roll type fabric drying and take-up unit.
    • Small feeding (with centering) (OPT-J0483)
      Roll media feeding unit equipped with a centering device and a dancer bar.
    • Jumbo roll unit (OPT-J0485)
      A jumbo roll unit that enables long roll fabrics to be loaded onto the printer.
    • Feeding plaiter unit(OPT-J0489)
      Feeding unit for folded fabric. 
      Feeding small roll media is also possible.
    • Exit in plaited unit (OPT-J0489) 
      A unit to collect the fabric in the folded.
      Used in combination with fabric drying heater.
    • Large drying heater (OPT-J0491)
      Suitable for thin materials likely to cause color migration and high-density printing.  
  • Transfer sublimation model option
    • Feeding / drying take-up unit for transfer paper (OPT-J0448)
      Exclusively designed feeding and drying take-up units for large transfer paper roll.
      Dancer bar mechanism controls to stabilize the media feeding & winding. 
 
Model
Tiger-1800B MkIII
Maximum print width: 1,850 mm (72.8")
[Direct-to-textile model]
[Sublimation transfer model]


เว็บไซต์นี้มีการจัดเก็บคุกกี้และข้อมูลส่วนบุคคล
เพื่อมอบประสบการณ์การการใช้งานเว็บไซต์ของคุณให้ดียิ่งขึ้น
รวมถึงให้เราสามารถมอบข้อเสนอ กิจกรรมส่งเสริมการขาย
เลือกเนื้อหาที่เหมาะสมกับคุณอย่างเป็นส่วนตัว

ท่านสามารถศึกษา เงื่อนไข และ นโยบายความเป็นส่วนตัว ได้ที่ลิ้งค์นี้
ใช้งานเว็บไซต์นี้เป็นการยอมรับข้อกำหนด
และยินยอมให้เราจัดเก็บคุกกี้ตามนโยบายที่แจ้งในเบื้องต้น
ยอมรับ